Showing all 12 results
.75″ Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4″ x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base…
8040 Acrylic Adhesive with Plunger AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-8040 cures in 10-12 minutes, has a 6-minute working time and develops working strength in 40…
8040 Acrylic Adhesive with Plunger CANNOT SHIP AIR – UPS GROUND ONLY AT-8040 is a good general purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps and dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-8040 cures in 10-12 minutes, has a…
AT-6031 Metal Bond Adhesive AT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in 40 minutes. AT-6031 develops more than 2,500 lbs. (psi) of tensile strength on most metal surfaces, making it an ideal alternative to welding in many applications….
AT-6031 Metal Bond Adhesive AT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in 40 minutes. AT-6031 develops more than 2,500 lbs. (psi) of tensile strength on most metal surfaces, making it an ideal alternative to welding in many applications….
AT-651 Mixing Tips for Use with AT-6031 Adhesive – Qty. 10 Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a 10 to 1 adhesive that requires a mixing tip with more mixing chambers to ensure proper mixing before use. These mixing tips minimize waste compared with…
AT-880 PolyBonder Adhesive – Single Weld Mount AT-880 is designed to bond plastics, metals, and rubbers; which have been challenging to bond to, in the past. AT-880 excels at bonding materials like HDPE, such as King Starboard ™. You’ll also find it as a great solution to bonding to things like polypropylene plastic. So if…
Aluminum Wire TieUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc. Manufacturer : Weld MountManufacturer Part No…
Polybonder Kit with AT-880 Adhesive Kit Contains: AT-880 Polybonder Adhesive (1) Dispensing Gun (1) Mixing Tips (qty 10) AT-5W (qty 30) Plano Case Manufacturer : Weld MountManufacturer Part No : 88100
Retail Wire Tie KitCAN NOT SHIP AIR, UPS GROUND ONLYThe AT-1050 kit contains one manual mix tube of AT-8040 adhesive and 25 pc. AT-5 white wire tie mount. Just enough parts for a small wiring job and ideal introduction to Weld Mount. The AT-1050 Kit contains: AT-8040 Adhesive (25) Pieces AT-5 White Tie Mount (1)…
Stainless Steel Panel Stud .62″ Base 8 x 32 Thread 1″ Tall – 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mounted with our unique non-sag acrylic adhesives which hold the parts in place on a vertical or overhead surface providing…
Stainless Steel Stud 1.25″ Base 1/4 x 20 Thread 0.75″ Tall – 100 Pack Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate. Manufacturer : Weld MountManufacturer…